E-therm Thermal Insulation
E-therm is a “3 in 1″ reflective foil insulation solution replacing traditional foil sarking, bulk fibre, and acoustic noise insulation with one easy product. With innovative and superior foam technology incorporated in the product, E-therm will also achieve the “thermal break” requirement set by the Building Code of Australia, J Section, when used on buildings with steel framework.
E-therm Reflective Foil Insulation is a thin insulation that works by combining closed cell airspace with highly reflective surfaces. It can be used in Domestic, Commercial and Horticultural building applications. E-therm is made using quality materials, and incorporates a bimetallic highly reflective aluminum film that sandwiches a low conductive layer of low density closed cell polyethylene foam. This foam has a very low rate of thermal conductivity, effectively reducing the amount of heat transmission into the building. E-therm also acts as a vapor barrier reducing the passage of moisture and dust particles into the roof and wall cavities.
Why choose E-therm Insulation for your building or home?
- Effective Thermal and Acoustic Insulation
- Made incorporating Recycled materials
- Fibre free – safe to install
- Insulation lowers your carbon footprint
- Made in Australia
- Meets or exceeds Australian Standards
- Maintains original structure – does not collapse
- Protecting your home from Wind, Dust, Noise and Solar Radiation
E-therm UF-500 is a unique under-floor insulation product that can be installed either at the building stage or as a retro-fit to existing buildings. It is manufactured from closed cell low density polyethylene foam that has a premium quality, highly reflective aluminium foil on both sides.
E-therm Shed 500
E-therm Shed 500 is a a cost effective alternative to low cost Bubble products. E-therm Shed 500 is suitable for roofs, walls, sheds, horticultural buildings, wineries, animal shelters, barns, chicken coops, pet housing, garages, boarding kennels, cat boarding, stables, etc.
E-therm for Tiled Roofs
E-therm is great for tiled roofs as it replaces heavy duty foils as well as thermal and acoustic bulk insulation that is normally used to achieve your desired thermal and acoustic performance.
E-therm for Metal Roofs
E-therm is extremely suitable for Metal roofs as it replaces heavy duty foils as well as thermal and acoustic bulk insulation that is normally used to achieve your desired thermal and acoustic performance.
E-therm for Brick Walls
E-therm is ideal for all wall systems including brick veneer and double brick cavity. With excellent thermal and acoustic properties, E-therm provides one of the best “R” values in a typical brick veneer construction. E-therm is easily installed and with such a thin product is great for walls.
E-therm for Framed Walls
E-therm is ideal for all metal & timber wall applications. The added benefit is that E-therm will also comply with the Thermal Break requirement set by the Building Code of Australia. So E-therm is the original all-in-one insulation solution. There is no need to worry about two or three products for your insulation needs as E-therm is all that is required.
E-therm for Floors
E-therm can be easily installed in most floor applications. It is easy to install and has excellent thermal performance ratings. Acoustically, noise travels up through floors especially timber, E-therm will eliminate enough noise to reduce it to an acceptable level.
E-therm for Commercial Roofs
E-therm has been designed especially for commercial and industrial roof systems. Being so thin and light the installation process makes it one of the easiest products to install, With the innovative foil flap, E-therm eliminates taping and overlapping on the longitudinal side of the roll.