NuWrap™ Pipe & Duct Insulation/Sound Lagging

For noisy pipes in buildings, NuWrap 5™ is the effective and easy-to-install sound lagging solution. Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the latest building codes, NuWrap 5™ is available in rolls and as pre-cut ‘flat packs’ for quick and easy installation. NuWrap 5™ Acoustic Pipe Lagging combines acoustic convoluted open cell foam laminated to NuWave 4-Zero acoustic barrier.

Nuwrap 5™ Acoustic Pipe Lagging Insulation complies with BCA requirements.

NuWrap 5™ Acoustic Lagging is Green Star compliant by meeting low VOC Compliance requirements and ODP-EMI9 requirements in that there are no Ozone depleting substances used in either the manufacturing process or the material composition.

Recent acoustic testing also confirms that NuWrap 5 continues to be compliant to the BCA requirements for habitable areas. Volume 1, section F5.6, for sole occupancy units, the duct or waste pipe must be separated from the rooms of any sole-occupancy unit by construction with an Rw+Ctr (airborne) not less than 40 if the adjacent room is a habitable room.

NuWrap 5 exceeds this requirement with just one wrap around the pipe and a 10mm plasterboard ceiling. No additional fibre batt is required in the ceiling.

Thermotec NuWrap 5 meets the requirements of all States and Territories and provided it is installed to the manufacturers’ recommendations, need no further regulatory body approval or certification.

NuWrap 5 is Australian made and is specified and used both throughout Australia and Internationally.

Product Dimensions:

1.35mtr x 3mtr Roll. 5mtr Roll length also available upon request.

NuWrap 5 Acoustic Lagging Precut ‘Flat Pack’ Products:

Suit pipe diameters from 40mm to 225mm also available to suit most PVC fittings.